CDS-1100D, CDS-600D TEC Cooling Modules TEST (2012. 4. 25)

We tested 8set of camera cooling modules to get the temperature curves/ time.

Below chart is the output.

In the period of 0~3minutes the drop down curves are almost similar to straight line and reached to about 70% of maximum cooling temperature.

After 5minutes the temperatures reached to 90% and when the time is 10minutes from start, arrived to the stable cooling state( = about ambient – 37C).

This lowest cooling temperature values are about 9C lower than the temperature BackyardEOS have read from CMOS board. This gap is caused by the location of canon’s thermistor is not on CMOS sensor.